2500 High Temp

2500 High Temperature Thrust Washers

For General Purpose High Temperature Applications in the 700 -1000ºF Range

Metcar 2500 High Temperature Thrust Washers and bearings were specially developed for high temperature applications from 700-1000ºF where normal self-lubricating bearings fail. Since temperatures above 600ºF increase the rate of attack by oxygen, Metcar has specially developed treatments to significantly increase oxidation resistance of this grade without hindering its inherent self-lubricating properties.

The sizes listed are normally available from stock and have been sized to provide long wear life under heavy loading and moderate speeds. All bearing assemblies can be fitted with Metcar2500. Available in all type bearing assemblies.

item #shaft sizeodidThickness
W-7101″2-1/4″1.015/1.017″5/16″
W-7111-1/8″2-1/2″1.141/1.143″5/16″
W-7121-3/16″2-1/2″1.202/1.204″5/16″
W-7131-1/4″2-7/8″1.267/1.269″5/16″
W-7141-3/8″2-7/8″1.392/1.394″5/16″
W-7151-7/16″3″1.455/1.457″3/8″
W-7161-1/2″3″1.518/1.520″3/8″
W-7171-5/8″3″1.644/1.646″3/8″
W-7181-11/16″3″1.706/1.708″3/8″
W-7191-3/4″3-1/2″1.769/1.771″3/8″
W-7201-7/8″3-1/2″1.896/1.898″3/8″
W-7211-15/16″3-1/2″1.958/1.960″1/2″
W-7222″3-1/2″2.021/2.023″1/2″
W-7232-1/8″3-3/4″2.148/2.150″1/2″
W-7242-3/16″4″2.210/2.212″1/2″
W-7252-1/4″4″2.273/2.275″1/2″
W-7262-7/16″4-1/2″2.462/2.464″1/2″
W-7272-1/2″4-1/2″2.525/2.527″1/2″
W-7282-3/4″5-1/2″2.776/2.778″1/2″
W-7292-15/16″6″2.965/2.967″1/2″
W-7303″6″3.028/3.030″1/2″
W-7313-1/4″6-1/2″3.279/3.281″1/2″
W-7323-7/16″6-1/2″3.467/3.469″1/2″
W-7333-1/2″6-1/2″3.530/3.532″1/2″
  • • Ability to operate without lubrication up to 1000ºF
  • • Long life
  • • Low and constant coefficient of friction
  • • Quiet, maintenance-free operation

Contact an Engineer at (914) 941-3738 or fill out the form below

Request 2500 High Temp