9800 High Temp

Metcar 9800 High Temperature Thrust Washers

For General Self-lubricating Applications up to 1100ºF Operating Temperature

Metcar 9800 is completely self-lubricating, operating successfully in temperatures of up to 1100º F, and ideally suited as a bearing or thrust washer for extreme temperature installations such as furnaces, lehrs, dryers, ovens, and other installations where temperatures of 1000º F and up are required.

The sizes listed are conservatively rated and normally available from stock. When considering the use of this special high temperature grade, it is recommended that you fill out and return the enclosed inquiry sheet to ensure that the bearing and/or washer size you’ve selected is adequate to meet your particular operating requirements.

item #shaft sizeodidThickness
W-9101″2-1/4″1.018/1.020″5/16″
W-9111-1/8″2-1/2″1.145/1.147″5/16″
W-9121-3/16″2-1/2″1.207/1.209″5/16″
W-9131-1/4″2-7/8″1.270/1.272″5/16″
W-9141-3/8″2-7/8″1.396/1.398″5/16″
W-9151-7/16″3″1.459/1.461″3/8″
W-9161-1/2″3″1.523/1.525″3/8″
W-9171-5/8″3″1.649/1.651″3/8″
W-9181-11/16″3″1.713/1.715″3/8″
W-9191-3/4″3-1/2″1.776/1.778″3/8″
W-9201-7/8″3-1/2″1.903/1.905″3/8″
W-9211-15/16″3-1/2″1.965/1.967″1/2″
W-9222″3-1/2″2.028/2.030″1/2″
W-9232-1/8″3-3/4″2.154/2.156″1/2″
W-9242-3/16″4″2.216/2.218″1/2″
W-9252-1/4″4″2.279/2.281″1/2″
W-9262-7/16″4-1/2″2.469/2.471″1/2″
W-9272-1/2″4-1/2″2.532/2.534″1/2″
W-9282-3/4″5″2.784/2.786″1/2″
  • • Ability to operate without lubrication up to 1100ºF
  • • Low and constant coefficient of friction
  • • Good wear life

Contact an Engineer at (914) 941-3738 or fill out the form below

Request 9800 High Temp